- Bibcocks[3]
- Drains[3]
- Water Filters[1]
- Paint Tool Sets[6]
- Brush[1]
- Plaster Trowel[7]
- Hammer[7]
- Pliers[1]
- Other Hardware[10]
- Wrench[7]
- Screwdriver[7]
- Safety Goggles[2]
- Face Shield[5]
- Tape Measures[7]
- Hoe[7]
- Saw[1]
- Pruning Tools[3]
- Spade & Shovel[3]
- Traffic Signal[4]
- Fire Extinguisher[3]
- Hand Carts & Trolleys[2]
- Truck Wheel[1]
- Material Handling Equipment Parts[1]
- Furniture Casters[3]
- Buckets[1]
- Warning Tape[1]
- Curtain Poles[2]
- Other Vehicle Tools[1]
- Contact Person : Ms. zhang catherine
- Company Name : Yiwu Bodun Import & Export Co., Ltd.
- Tel : 86-579-85199935
- Fax : 86-579-85199936
- Address : Zhejiang,YIWU,YIWU FUTIAN MARKET G5-19935/ 19936
- Country/Region : China
- Zip : 322000
FX-F0101 450ml foam fire-extinguisher
• Step 1 Teach everyone where extinguishers are located and how they work. Explain that fighting a fire requires a judgment to be made that it's small enough to put out easily--a call that ought to be made by an adult. If the fire is too big to fight, the action that may save more of the house and its inhabitants is to get out and call the Fire Department immediately. If the fire is small and appears not to be spreading, a buddy should call 911 and check to make sure there's at least one way to escape if the fire "blows up" unexpectedly before the extinguisher is in hand.
• Step 2Detach the extinguisher from its mount when a need arises. Most home extinguishers don't sit in boxes with glass doors but on mounting plates, or even stand in a closet or cabinet. Check to make sure the unit is fully charged; most extinguishers have some sort of gauge or indicator that indicates proper charging. Carry it toward the fire until you begin to feel the heat of it---five to ten feet for a small fire, and set the extinguisher base down on the floor.
• Step 3
Pick up the hose clipped to the side of the extinguisher and pull the steel pin with the chain on it straight out of the handle. Aim the hose at the base of the fire and squeeze the grip of the handle. The closing of the grip will release the pressurized chemicals inside the cylinder, and they will be propelled out of the hose with some force, so hang on to the end of the hose and point it away from you toward the fire before squeezing the trigger.
• Step 4Sweep along the base of the flames with the extinguisher contents, maintaining a firm grip on the depressed handle. Keep aiming at the base of the flames, advancing slowly if possible, until the fire is completely out or until the extinguisher is completely discharged---about 10 seconds. Check to make sure the fire's out before leaving the area. If the extinguisher's empty and the fire is still going, it's time to get out and close the door behind you.
• Step 5Inspect and recharge the extinguisher as soon as possible after use---even if it was just discharged for a second or two. Extinguisher pressure dissipates and valves leak after time under pressure. Replacing an old extinguisher is much less expensive than replacing your home.
FX-F0101 450ml foam fire-extinguisher